Pages

Tuesday 24 February 2015

Myvi 1.5 Aircond outlet.

Look like I skipped 2014. Yes, because my SD card failed, lost everything. :D

After I read some forum, I found my car have the same problem like the others(Myvi 1.5 2014). The aircond outlet water is dripping right to my steering rack. and the bolts are turning to corrosion colour as well. Picture below shows:


So to prevent it from happening, we can use commercial available items as below:
1. Garden Hose
2. Tie wraps
3. Pen Knife
4. Ruler
5. Cutter


After measuring, I finalized with 13 inch of length. One advantage using the new garden is the curvature of the hose after trimmed, it will be very useful.


Put the hose in into the outlet and secure with a tie warp and than at the bottom part of the car, there is a hole which is not used. Install the tie wrap through the hole and than to the garden hose to secure it. Picture show as below:


After installing, I found the hose length satisfactory, but the hose is almost touching with the harness beside it. After a few drive, due to vibration, the hose move even closer to the harness.
To prevent it from rubbing, I added one more tie wrap to the hose and the steel pipe at the wall to hold it. This is to make sure the hose will not rubbing with the harness.



P/S: This is just my way of doing. Do it at your own risk. :D
Powered By Blogger